|
|
|
|
 |
THE GREATEST ADAPTABILITY:
| - |
It can
be installed without any physical contact with
machines. |
| - |
The
same laser can work over several machines in one
line. |
| - |
It is possible to
achieve highly precise and made to measure systems,
to better organize space. |
Click Here to Load the Youtube Video
|
POWERFUL AND GUARANTEED:
|
- |
CO2
sealed LASER SOURCE with nominal power from 40 to 400 W.
Available in the following versions:
- with air cooling (low-cost)
- with thermostated cooling liquid |
|
- |
BRUSHLESS MOTORS move
the laser column along the bar with high acceleration,
speed and stops accurately and efficently.
|
|
GALVANOMETRIC LASER HEAD:
|
- |
Directing the
laser beam extremely fast and precisely thanks to special
mirrors moved by electromagnetic motors (making it possible
to obtain better results in comparison to traditional
cutting devices that use laser heads moved by belts and x -
y motors). |
|
 |
GMI Laser III is available in a
CLASSIC VERSION WITH 2 AXIS GALVANOMETRIC LASER HEAD and 300x300 mm
field and in a 3 AXIS HEAD VERSION
|
 |
| - |
The
3rd axis (Z) is mechanical: the head lightly raises
and lowers, to regulate the fabric’s thickness
(guided via software). |
| - |
To
focus the cutting surface a focusing lens is
used(1). |
| - |
The
maximum working field has been fixed at 300 x 300. |
|
SUPERIOR VERSION 3 AXIS (X, Y, and Z) HEAD
| - |
With Dynamic Beam
Expander (lens moves at the mirrors’ speed), both
the fabric’s thickness and the beam’s focalization
are perfectly regulated on the complete surface and
at the same time. |
| - |
Thanks to this
device and the different optics and the mirrors’
characteristics, we can obtain the following
advantages:
- More control to calibrate the half cut which gives
the ability to cut the fabric above without cutting
the one below.
- More cutting linearity.
- The possiblity to have different maximum working
fields changing the head’s distance from the cutting
surface. |
|
 |
|
|
